Communication GUI Guide
GXE600 Series
TDK-Lambda
<Page>
19/41
4 Manual screen mode :
T his chapter is based on the Manual screen mode. For details on screen switching, please refer to Chapter 2.
4.1 Screen layout
2) [Disconnect] Button
１
) Screen mode switching
3) Unit ID
4) GXE Output area
5) Master Settings area
6) Tab display area
7) Information display area omitted button
8) Information display area
Item
Overview
1
Screen mode switching
Switch the screen mode with "Graphical"
⇔
"Manual".
2
[Disconnect] Button
It disconnect with closed COM port of the PC.
After disconnection, it becomes the GUI Configuration tab of the Graphical
screen mode.
3
Unit ID
Displaying the ID of the connected GXE.
It is also possible to change the connection destination by changing the value.
Other communication settings depend on settings on Graphical screen mode.
4
GXE Output area
It is used to control the output of GXE with GXE Access.
5
Master Settings area
This is the area to display / edit each measured value of GXE.
6
Tab display area
This is the area to display / edit the setting values of each function of GXE.
(details will be explained in the next chapter)
7
Information display area
It switch display / hide the Information display area.
omitted button
8
Information display area
The status of GXE Access is displayed.