TCS TCS 3000 Скачать руководство пользователя страница 10

Страница: 10 / 52

Total Control Systems

www.tcsmeters.com

Reports

1) OPERATION PARAMETERS

Selecting Operation Parameters allows you to view the live Battery and 5V Supply Voltage to internal compo-

nents, as well as Display, Main Board and RTD temperatures. The Runtime is the accumulated time of the reg

ister operation from the factory.

2) SHOW PROVER STATUS

Selecting Show Prover Status allows you to view the last date and time of the last calibration.

3) PROVER TICKET

Selecting Prover Ticket allows you to print the prover information from the register.

4) METER INFO

Selecting Meter Information allows you to view the Meter Data, such as The Truck ID, Register ID, Meter Make,

Meter Model, Meter Version, and the Meter Serial Number. Information must be input within the Weights &

Measures menu.

+++ Required for Calibration Prover ++

5) VERSION INFO

Selecting Version Info allows you to view the Version of Software and Firmware running on the TCS 3000.

6) MEMORY STATUS

Selecting Memory Status allows you to view the number and type of tickets printed by the TCS3000.

The Transferred and Non-Transferred deliveries show whether the delivery information has been seen and

transferred to third party software accounting POS programs.

7) PRINT ERROR LOG

Selecting Print Error Log allows you to log printer errors in e-ticket. To view the print errors you must have a

computer interface (e.g. handheld device, HUB, etc.).

8) CHECKSUMS

Selecting Check Sums allows you to check the TCS 3000 software for errors.

Software Checksum

Firmware Checksum

OS Checksum

9) PREVIEW PROVER TICKET

Selecting the Preview Prover Ticket will allow you to scroll page by page through the calibration prover ticket.

10) PREVIEW ERROR LOG

Selecting the Preview Error Log will allow you to scroll through the error log of the TCS 3000 computer.

11) CONFIG PARAMETERS

Selecting the Preview Parameters will allow you to scroll through the system configuration parameters.

Selecting the Print Parameters will you to print the system configuration parameters.

12) SHOW LAST TICKET

Selecting Show Last Ticket allows you to scroll through the last delivery ticket produced.

System Settings

1) LANGUAGE

Choose the language that you want the system and product settings to be displayed.

ENGLISH is standard, and currently the only available language programmed.

The Reference and Value must
match.

If the values do not match, select
MODE to recalculate the value.

Содержание TCS 3000





















































Результаты поиска

Содержание TCS 3000

Отзывы:

Похожие инструкции для TCS 3000

Бренды по названию

Популярные бренды

TCS TCS 3000, Руководство по установке и эксплуатации

Результаты поиска

Содержание TCS 3000

Отзывы:

Похожие инструкции для TCS 3000

Бренды по названию

Популярные бренды