TCS TCS 3000, Руководство по установке и эксплуатации

Страница: 13 / 52

13
Total Control Systems www.tcsmeters.com
MULTIPLE DELIVERIES
Allows for the user to fill multiple tanks on one (1) single ticket transaction. Simply press and hold
the SHIFT key down while pressing the START key to begin the multiple deliveries. If preset is
enabled, each tank delivery will prompt the preset amount.
CUSTOMER ID OPTIONS
The Customer ID Option will provide four (4) separate fields for the user to input prior to
the delivery. The Customer Identification is normally used for Tank, Truck, Airplane Tail
No., Locomotive, Driver, Customer, etc. Manual entry of data will be required through the
alpha-numeric keypad. After selection, press ENTER to complete setting.
Customer ID# (1-4)
Customer ID# Text
Field programmable for identification
Request ID#
Field prompts user to enter an ID
Enforce ID#
Field requires user to enter an ID in order to operate the system
Validate ID#
Field validates the ID to ensure the ID is in the database, if invalid
the system will be inoperable
DISPLAY PRECISION
The unit precision can be displayed as a whole, tenth, hundredth or thousands measure
ment. After selection, press ENTER to complete setting.
1 Whole Unit
1.1 Tenth Unit
1.11 Hundredth Unit
1.111 Thousands Unit
ZERO FLOW TIMEOUT
Feature will complete a delivery transaction if the user does not press the STOP key.
Enter number value in Seconds for the timeout setting and press ENTER.
NOTE: Factory setting is 180 seconds, 3 minutes after the last pulse transmission to the TCS 3000 regis-
ter. This feature CANNOT be disabled. For desired extended periods, utilize a large number to have the
Timeout ignored (Example: 99999).
PAUSE OPTIONS
Pause controls how pump control is used.
Allow Pause Allow Pause will Pause the pump during the delivery
Pause Pump Pause Pump will stop the pump during a Paused delivery.
6) AUXILIARY DEVICES
EXTERNAL DISPLAY
The External Display setting is for the specific manufacturers of large LED displays. This
setting is for serial communication to an ancillary display that will read the same data that is
displayed on the TCS 3000 register.
Enable/Disable Enable or disable and press ENTER