TCS TCS 3000 Скачать руководство пользователя страница 16

Страница: 16 / 52

Total Control Systems

www.tcsmeters.com

WATER SENSOR

Allows you to program the maximum and minimum capacity of the Water sensor to read correctly. Water

sensor settings should be have a 0 PPM at 4 mA Minimum and 50 PPM at 20mA for Maximum .

View/Edit

1) Minimum Concentration Water PPM Input

2) Minimum Output Current mA Entry

3) Maximum Concentration Water PPM Input

4) Maximum Output Current mA Entry

NOTE:

Settings will be Current

(mA)

Only

Unit

Choose the Unit of Measure: PPM

DENSITY SENSOR

Allows you to program the maximum and minimum capacity of the Density sensor for correct

measurement.

View/Edit

1) Minimum Density per Unit of Measure Input

2) Minimum Output Current mA Entry

3) Maximum Density per Unit of Measure Input

4) Maximum Output Current mA Entry

NOTE:

Settings will be Current

(mA)

Only

Unit

Choose the Unit of Measure: lbs/GAL, kg/M3, kg/L, lbs/UKG, lbs/ft3, lbs/in3, lbs/floz, oz/floz

INTERLOCK

Allows you to use the Emergency Stop terminal on the 1, 3 and 8 channel communication expansion

boards. Requires an external switch for actuation.

Enable/Disable

Enable or disable for operation

LAMP INDICATOR

Allows you the use of External Lamps to indicate Water Sensor warnings.

Lamp Enable/Disable Enable or disable for operation. If enabled, you must reboot the register for the settings

to be recognized.

Lamp Test

Select from OK, Warning, Alert, Sensor Low, Sensor High, Stop Alarm, Sensor Fail and

Lamp off to verify testing.

NOTE: if you have not rebooted the TCS 3000 register after Enabling operation, the Lamp Test will not

operate correctly.

Lamp Address

Assign the address of each Lamp Indicator.

Содержание TCS 3000





















































Результаты поиска

Содержание TCS 3000

Отзывы:

Похожие инструкции для TCS 3000

Бренды по названию

Популярные бренды

TCS TCS 3000, Руководство по установке и эксплуатации

Результаты поиска

Содержание TCS 3000

Отзывы:

Похожие инструкции для TCS 3000

Бренды по названию

Популярные бренды