TCL L32D2930, Руководство по обслуживанию, Страница: 22 / 50

Test and Alignment Specification for MT56EP1 Series (v0
01) 160825.docx
Page 14 of 25
Appendix
⑵
“ How to upgrade FLASH SWusing USB ”
ƒ
Upgrade with Loader
¾ Switch TV to standby (LED should light on)
¾ “ V8-NT67F01-LF1Vxxx.bin ” named “ update.img ”
¾ Copy the SW BIN image “ update.img ” into USB stick (pen drive) root path
¾ Plug USB stick to the TV
¾ Press “ Power ” button from local keyboard during a few seconds to start upgrading process
¾ Release “ Power ” button once LED is blinking or USB stick starts blinking, TV is uploading SW BIN image
¾
When reflashing is successful, TV should restart automatically after ~3min
¾ Remember to perform “ Factory menu Æ Reset ALL “ or “ Factory menu Æ Reset Shop “ and then press RCU
“ OK/ ► ” key
¾ Switch off TV by removing AC cord
¾ Reconnect AC cord to restart TV
Note
⑩: If “Reset Shop” was performed, a “Welcome Setup” menu should be displayed, otherwise new SW version
should be displayed into relevant Factory mode caption info or on bottom of “Factory menu“
ƒ Upgrade with novatek324.bin
¾
In the previous of upgrade SW using USB, make sure the MEMC flash has the other version of the program
¾ Download the SW Package “ V8-NT66701-LM1Rxxx.bin ” from FTP, and rename the file
“ V8-NT66701-LM1Rxxx.bin ” to “ NT_FRC.bin ”
¾ Copy the SW Bin image “ NT_FRC.bin ” into USB stick (pen drive) root path
¾ Plug USB stick to the TV
¾ Power on TV and Go to “ Factory menu Æ USB Clone && Update Æ FRC Upgrade Æ yes Æ “ then press RCU
“ OK ” key
¾ ALL the upgrade process may be 30~40 seconds
¾ When reflashing is successful, TV should restart automatically.
¾
Go to “ Factory menu
Æ
Other
Æ
FRC Version “ ,you can find FRC version.
ƒ
How to update main software & FRC324(MEMC) by local keyboard
¾ Copy the
MAIN
SW BIN image “
V8-NT67F01-LF1Vxxx.bin
” into USB stick (pen drive) root path
¾
Copy the MEMC SW Package
“
V8-NT66701-LM1Rxxx.bin
”
into USB stick
(pen drive) root path
¾ “ V8-NT67F01-LF1Vxxx.bin ” named “ update.img ”
¾ “
V8-NT66701-LM1Rxxx.bin
”
named
“
324.bin
”
¾ Plug USB stick to the TV
¾ Switch
OFF
TV
.
¾
Press
“
power on
”
key for 4s, TV will update SW automatically.
¾ Whenreflashing is successful, TV should restart automatically after ~3min
¾ Remember to perform “ Factory menu Æ Reset ALL “ or “ Factory menu Æ Reset Shop “ and then press RCU
“ OK/ ► ” key
¾ Switch off TV by removing AC cord
¾ Reconnect AC cord to restart TV
Note
⑾:
“ V8-NT66701-LM1Rxxx.bin ”
only applies to the TV which has the function of MEMC used Novateck IC
N72324