15
to the scheduled programme when the time you have
set comes. When time is out and you do not execute
any operation, the dialogue box will disappear and no
further operation will be executed.
b. Set
Record
, if you really want to start your
scheduled recording when the time you have set
comes. When time is out and you do not execute any
operation, scheduled recording will start automatically.
-
Repeat type
: set different repeat modes for the
recording.
After you enter all the information, use
to select
OK
, then press
OK
to add the schedule you set into your
schedule list.
4. Press the red button and repeat above procedures to
add another schedules.
5. If you wish to edit a schedule, select it and press
OK
to enter. You can also remove the selected schedule by
pressing green button.
6. Press
to close the menu.
Settings
The Settings menu allows you to configure the TV
with your preferences. For details, please refer to the
following
Using System Settings
part.
Note:
The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in
product or place of installation. Feature might also be
blocked by TV network due to copyright protection (HD
content, recording protection). Please use
on the
remote control to check if the feature is available in your
product.
1. Press
on the remote control and select
PVR
.
2. Press
OK
/ to enter. It starts to record automatically.
3. Press
on the remote control and use
to adjust the recording duration.
4. Press
OK
to stop recording manually, the recorded
file will be saved. In normal operation, the recording will
stop automatically when the recording duration expires.
5. In recording, the PVR mini pane will also show on the
screen to indicate the recording progress.
6. To watch the recorded programme, exit PVR mode
first and go to
> APPS > MideaCenter
. Select the
folder
PVR
, then select the related record file. Press
OK
to play. (It is the same if you record a digital radio
programme).
Notes:
- This feature is available only for digital non encrypted
channels. Even when CICAM (CI or CI+) is inserted, this
feature is not available on encrypted channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive to avoid
the loss of your important data due to unforeseen
malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source during
recording, store the recording data before changing the
channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the file
format is not supported, the file is damaged, or the file
cannot be decoded.
- Do not disconnect the USB drive when the system is
reading a file or transmitting data, otherwise the system
or the drive may be damaged.
Schedule List
This function is used to perform scheduled recording.
1. Press
on the remote control and select
Schedule
List
.
2. Press
OK
/ to display the schedule list.
3. To add a schedule into your schedule list, press the
red button first to display schedule information. Then,
-
Channel number:
Press
OK
/ to enter, then use
to select the channel number.
-
Start date:
use the alphanumeric buttons to set the
recording date.
-
Start time:
set the starting time of the recording.
-
Stop time:
set the stopping time of the recording.
-
Schedule type
:
a. Set
Reminder
to be reminded that you can switch
Menu Operation
