background image

Page 7

B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48Operator Manual 

MB-440-07

Introduction

The only personnel authorized to repair, modify, or adjust any 
part of this or any Taylor-Dunn vehicle is a factory authorized 
service technician. Repairs made by unauthorized personnel 
may result in damage to the vehicle’s systems which could lead 
to an unsafe condition resulting in severe bodily injury and/
or property damage.  Unauthorized repairs may also void the 
vehicle’s warranty.

WARNING

Who Should Read This Manual

This manual is intended for use by anyone operating or performing routine maintenance on this 
vehicle. Each person should be familiar with the parts of this manual that apply to their use of this 
vehicle. 

About This Manual

This manual is valid only for the serial numbers listed on the front cover. If the ending serial number 
is blank, then this manual was for current production vehicles when printed. If you did not receive 

this manual with the vehicle, you should confirm this manual is valid for your serial number at the 

Taylor-Dunn web site. A place to record your vehicle information is provided on the inside front cover

 This manual is subject to change without notice. Updates are available through your dealer or the 
Taylor-Dunn web site at www.taylor-dunn.com.

Taylor-Dunn is not to be held liable for errors in this manual or any consequential damage that 
results from the use of this manual.

The purchase of this vehicle shows a belief in high quality products manufactured in the USA. 

Taylor-Dunn, a leading manufacturer of electric burden and personnel carriers since 1949, wants 
to be sure this vehicle provides years of reliable service. Please continue to read this manual and 
enjoy this high quality Taylor-Dunn vehicle.

This manual is to serve as a guide for the operation and maintenance of your Taylor-Dunn vehicle. 
Taylor-Dunn has made every effort to include as much information as possible about the operation 
and maintenance of this vehicle.

This manual contains information about the standard equipment and options available for this model. 
This vehicle may not be equipped with all available options. If you do not know which information 
applies to your vehicle, then you should contact your dealer.

Included in this manual are:

• 

Vehicle Description

• 

Safety Rules and Guidelines

• 

Operational Information

• 

Operator Responsibilities

• 

Owner Responsibilities

• 

Control Operation and Location Information

• 

Maintenance Information

Before operating or performing maintenance on this or any other Taylor-Dunn vehicle, read the 
appropriate Taylor-Dunn manual. 

Please, be aware of all cautions, warnings, instructions, and notes contained in this manual. 

Содержание Bigfoot

















































































Отзывы: