manualshive.com logo in svg

Taylor-Dunn Bigfoot, Руководство оператора

Поделиться
Скачать
Taylor-Dunn Bigfoot Скачать руководство пользователя страница 56

Page 56

B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48 Operator Manual 

MB-440-07

Lester Summit II Charger

Description of Operation

The Summit II charger is designed as 
an automatic charger. It is available with 

charging profiles for SLA and FLA batteries. 

Refer to the factory specifications on 
the charger for the type of battery it was 

configured for when manufactured. Use of 

different batteries not listed may result in 
premature failure of the batteries.

The charger turns itself on when it is plugged into the wall outlet and turns off when the batteries 
are fully charged. The charger continues to monitor the battery voltage and if the battery voltage 
drops below a threshold value, then the charger will turn on again for a short cycle to keep the 
batteries topped off.

There are three lamps on the charger used to indicate the active charging status and if any 
faults occurred during the charging cycle.

The charger features Bluetooth® wireless communication, which enables a smart phone or 
tablet running the ChargerConnect™ app to be used to:

• 

View the real-time charge cycle status

• 

Download charge cycle history records from the charger

• 

Upload charge cycle history records to the Cloud for access anywhere in the world

•  Select the active battery profile
•  Download new battery profiles from the Cloud
•  Upload battery profiles to the charger

Detailed operating instructions and the ChargerConnect™ app can be downloaded from the Lester 
Electrical web site. 

http://www.lesterelectrical.com

Instructions for using the ChargerConnect™ app are also available on the Lester web site.

The charger data plate includes a label with the Factory Specifications programed in the charger 

at time of manufacture. If the program settings are changed then a new label should be applied 

with the specifications. Replacement labels are not available from the factory.

Содержание Bigfoot

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды