TATU PST DUO FLEX Скачать руководство пользователя страница 143

Страница: 143 / 150

141

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST DUO FLEX / PST DUO FLEX SUPREMA

General application

Planter maintenance

Wash the whole planter using only water.

Remove the hoses and wash them immediately using water and neutral soap.

Verify all moving parts of the planter for wearing occurence. If necessary, replace some

parts and leave the planter ready for the next planting season.

Repair the damaged paintwork.

Spray the metallic parts with protective oil. Never spray used engine lubricant oil.

The driving mechanism chains should be removed at the end of the planting season,

cleaned and stored in a recipient with oil until the next planting season.

Tighten the bolts and nuts of all components that may get loose if any vibration occurs.

Clean and lubricate all grease fittings.

After making all repairs and maintenance cares, store the planter in a covered and

dry place.

Keep the planter properly supported and avoid the direct contact of the disc blades

and tires with the soil.

After finishing a job, clean up the seed hoppers by removing all the seeds and washing

right after.

Remove the hoses and air ducts, clean up and place them on their original place.

Check if the battery used on the planter is in good conditions.

Watch carefully the installation and handling position of the planter cables, since more

than half of the maintenance causes are related to that.

Regularly check the electric connections over the hydraulic control valve of the planter

and also check the equipment - planter connector.

Replace the missing or damaged safety decals. Marchesan supplies these decals,

upon request and indication of their respective serial numbers. The operator must know the

need and importance to keep the decals in the proper place and in good conditions. The

operator also have to know the need to follow the instructions, as the lack of safety may

increase the risk of accidents.

Содержание PST DUO FLEX























































































































































Результаты поиска

Содержание PST DUO FLEX

Отзывы:

Похожие инструкции для PST DUO FLEX

Бренды по названию

Популярные бренды

TATU PST DUO FLEX, Руководство оператора

Результаты поиска

Содержание PST DUO FLEX

Отзывы:

Похожие инструкции для PST DUO FLEX

Бренды по названию

Популярные бренды