TATU PST DUO FLEX Скачать руководство пользователя страница 106

Страница: 106 / 150

104

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST DUO FLEX / PST DUO FLEX SUPREMA

Assembly

Assemble the hopper support (A) to

the frame (B) using bolts (C) and nuts.

The supports must be assembled

between the row units to avoid that they

interfere on the seed row movement,

what would lead to damages.

Assemble the single seed hopper

(D) on the support (A) and lock using

bolts (E), flat washers, spring washers

and nuts.

Use the slots (D) on the support (A)

to adjust it.

The seed singulator must be

positioned directioned to the platform.

Lock the hose (F) to the single seed

hopper outlet using the fastener (G).

Lock the other end of the hose (F)

to the individual seed hoppers using the

fastener (G).

Hopper support and single seed hopper

• On this single seed hopper system

with mechanical metering, the seeds

fall off by gravity.

• Keep the fasteners (G) always tightened

up so they will not get loose during the

plantation.

• It is recommended to leave a clearance

on the hoses (F) so that the seed row

units can work free.

NOTE

Содержание PST DUO FLEX























































































































































Результаты поиска

Содержание PST DUO FLEX

Отзывы:

Похожие инструкции для PST DUO FLEX

Бренды по названию

Популярные бренды

TATU PST DUO FLEX, Руководство оператора

Результаты поиска

Содержание PST DUO FLEX

Отзывы:

Похожие инструкции для PST DUO FLEX

Бренды по названию

Популярные бренды