TATU PST DUO FLEX, Руководство оператора

Страница: 48 / 150

46
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. PST DUO FLEX / PST DUO FLEX SUPREMA
Set-up instructions
IMPORTANT
7)
To close the fertilizer outlet place the chutes (G) over the augers that will not be used;
8) The air system interruption to the metering is done using the cap (H);
9) For the seed interruption, use the cap (I).
Procedures to change the spacing
To work with some of the row units lifted, you must:
• Remove all the rear part of the row units;
• Remove the traction spring;
• Release the frontal part of the upper rocker arm;
• Lift the row unit and lock it using the upper rocker arm;
• Remove the fertilizer tube from the fertilizer row unit.
Retighten all sets, paying attention to the following points:
• Retighten the nuts that fasten the seed rows on the frame gradually,
avoiding to totally tighten each nut at a time.
• That information is also useful between a row unit and another. So,
do not totally tighten a row unit at a time, but gradually.
• When switching between this nut tightening operation of a row unit
and passing to another, it is necessary to spin the hexagonal axle to
keep the proper alignment and avoid locking.
• The tightening of the bearings that fasten the hexagonal axle should
be done in the end.
• Check the chains correct alignment (clutches / wheel supports).
H H
I I
G G