TATU PST DUO FLEX Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 150

background image

8

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST DUO FLEX / PST DUO FLEX SUPREMA

To the operator

• Only trained and qualified personnel are allowed to operate the equipment.
• While working or during transportation, only the presence of the operator is

allowed on the tractor.

• Do not allow children to play near or over the equipment, while it is operating,

during transportation or storage.

• Have full knowledge of the soil before starting to work. Use the speed which is

suitable to the conditions of the ground or pathways to be covered. Provide the

delineation of obstacles or hazardous locations.

• Use personal protective equipment (PPE).
• Wear appropriate clothes and footwear. Avoid clothes that are either loose or

hanging from the body, which may become entangled in moving parts.

• Never operate the equipment without its

protective devices

.

• Be careful while hitching the equipment to the tractor.
• Wear protective gloves to work near the disc blades.
• When raising or lowering the equipment, check if there are no people or animals

close or under it.

• Never attempt to change the adjustments, clean or lubricate the equipment while

it is moving.

• In case of emergency, know how to stop the tractor and equipment quickly.
• Always shut down the engine, remove the key and use the handbrake before

leaving the tractor seat.

• Only pull the equipment using tractors with appropriate power.
• Carefully check the transport width on narrow locations.
• Whenever you unhitch the equipment, either in the field or shed, do it on a flat and

firm surface and use the jacks. Make sure the equipment is properly supported.

• Do not drive the equipment under the influence of alcohol or any soothing/

stimulating medicine, as it may result in a serious accident.

• In case of a fire outbreak or any possible hazard, the operator must leave the

area as fast as possible and look for a safe place. Always have emergency

numbers at hands.

• Do not allow people or animals to get under the equipment at any time.
• We suggest that you carefully read the manual, as it will be a guide for periodic

verifications that need to be done and will allow that you assure the maintenance

of your equipment.

• If there is any doubt left after reading it, ask your dealer. For more complicated

operations, there will be the right person to help you there.

• Please check the general safety instructions on the back cover of this manual.

«
...
8
9
10
11
12
...
»

Содержание PST DUO FLEX























































































































































Отзывы:

Нет отзывов

Похожие инструкции для PST DUO FLEX

Бренд: BANLAW Страницы: 32

Бренд: Baker Instrument Company Страницы: 24

Бренд: MacDon Страницы: 84

Бренд: MacDon Страницы: 89

Бренд: Patton electronics Страницы: 18

Бренд: Unex Страницы: 5

Бренд: JB Systems Страницы: 7

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 36

Бренд: 3A HEALTH CARE Страницы: 16

Short/cut 2000 Audio Editor

Бренд: 360 Systems Страницы: 4

Бренд: Datavideo Страницы: 28

Бренд: Mainca Страницы: 21

Бренд: Daktronics Страницы: 30

Бренд: DAKOTA ULTRASONICS Страницы: 28

ST60+ SPEED INSTRUMENT

Бренд: Raymarine Страницы: 60

Бренд: Raymarine Страницы: 15

Бренд: RaycoWylie Страницы: 9

Бренд: Raven Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды