TATU PST DUO FLEX, Руководство оператора

Страница: 140 / 150

138
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A. PST DUO FLEX / PST DUO FLEX SUPREMA
General application
Important recommendations
Removing Removing
the pressure the pressure
A A
Before starting working, carry out a general inspection on the equipment and retighten
all nuts and bolts, also checking the conditions of all pins and cotter pins to avoid future
damages. Repeat this operation after the first day of work.
The tractor drawbar must remain fixed and centered.
Inflate the tires following the pressure instructions on the 'tires inflation' page.
Before connecting the equipment hoses to the tractor, check if the hose is pressurized.
If the answer is positive, the operator will not be able to connect the male part to the female
one - and forcing this operation may lead to severe damages to the eye and skin as the fluid
may escape. To remove the pressure on the tip of the hose, press the male coupling against
a non-metallic surface to move the retention valve, until there is no oil leakage anymore.
On some cases, it may be necessary to use a wrench to loosen up the hose port to
relieve the pressure.
After hitching the hoses, activate the control valve lever and check if there is no leakage
on the terminals and on the quick couplers.
To transport the equipment, it is recommended to use the lock (A), so there will not be
any movement during transportation.