Tatu Marchesan SDA3, Руководство оператора

Страница: 99 / 112

97
SDA³ / SDA³ E - Rev.04 - Mar / 22
10. Maintenance
For the correct fertilizer metering system maintenance or to make any kind of repair in
its internal parts, proceed as follows:
- Remove the squared shaft (A) with bevel gear (B) and the bearing (C);
- Remove the inner squared shaft (D), along with the bevel gear (E), bearing (F) and
the fixation nut (G) by the frontal part of the metering;
- Remove the grease fitting (H) from the rear part of the metering to release the other
parts as shown in the illustration and replace the defective ones;
- Assemble the metering system again observing the correct position of the right and
left augers.
A A
B B
C C
D D
E E
F F
G G
H H
Fertilizer metering maintenance
- Do not forget to lubricate the metering grease fittings daily, as mentioned on the
'lubrication' section to avoid future problems.
IMPORTANT