Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 59 / 94

TSR 5200 HDD Advanced Settings
53
- Select the menu option DiSEqC using
the or buttons.
- Select one of the options Tone A ,
Tone B , #1 , #2 , #3 , #4 and OFF using
the or buttons.
-
Press and then press to save the
settings, or press to cancel the
process.
Tone A, Tone B These settings are the "Tone Bursts":
A tone burst is a simple switching command that is only capable of
sending control information together with an analogue switching status
(14/18V and 22kHz).
#1, #2, #3, #4 Allows for the control of up to four LNBs via DiSEqC.
This is necessary when using multiple satellite antennas or multi-feed
systems (one antenna with multiple LNBs) that are interconnected via a
multi switch.
OFF DiSEqC is disabled.
DiSEqC is not necessary when using a single-user antenna system.
LNB Power
LNB Power is ON in factory-default configuration. Turn this feature off if you are connected
to a multi-user satellite antenna system using single cabling. This system is typical for
large residential buildings.
Select Antenna Setup from the Installation menu (see page 49) and press on the
remote control.
-
Select the menu option LNB Power
using the or buttons.
-
Select the menu option ON or OFF
using the or buttons.
-
Press and then press to save the
settings, or press to cancel the
process.