Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 53 / 94

TSR 5200 HDD Advanced Settings
47
Do not power the device off during this procedure! If you power the system off,
the installation will be aborted and it will not be possible to power the device
back on.
If you are prompted to power the system off and on and this does not happen
automatically, toggle the power switch [18] to restart it.
Updating the Software from Hard Disk
If you have downloaded an updated device software (firmware) for your TSR 5200 HDD
(see page 64 – Exchanging Data with the PC), you can use this function to execute this
software.
If you have customised the channel list it is recommended that you backup the
channel list before executing this procedure (see page 46 - Saving the Channel
List on the Hard Disk) so you can restore it after the process is completed (see
page 46 - Updating the Channel List on the Hard Disk).
Select Software Upgrade from HDD from the HDD Interface menu (see page 45) and
press on the remote control.
-
Press or to select the desired
entry from the Software Upgrade from
HDD menu.
-
Press and enter the password via the
numeric keys.
The device will load the software.
Do not power the device off during this procedure! If you power the system off,
the installation will be aborted and it will not be possible to power the device
back on.
If you are prompted to power the system off and on and this does not happen
automatically, toggle the power switch [18] to restart it.
!
!
!