Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 17 / 94

TSR 5200 HDD Getting Started
11
Powering the Device On/Off
Powering On
Make sure that the power switch on the back of the TSR 5200 HDD is switched on. Press
key [1] on the remote control or key [1] on the front of the device to power on the TSR
5200 HDD.
Powering Off
Press key [1] on the remote control or key [1] on the front of the device to power off the
device. The TSR 5200 HDD is now in Stand-by mode.
In Stand-by mode, the TSR 5200 HDD is not fully switched off and still
consumes a little power. This allows you to power the device back on at any
time using the remote control.
If you wish to fully turn off the TSR 5200 HDD, toggle the power switch [18] on
the back of the device to "0" (see figure on page 10 – Getting Started).
Please note that when you next switch on the device using the power switch
[18] on the back of the TSR 5200 HDD, it will take a few minutes before it is
ready for use.
Installation
The channels that can be received via satellite are already preset in the TSR 5200 HDD.
As soon as new channels are available via satellite, the settings will be updated.
Furthermore, it is possible to tune the channels manually and also adjust the channel order
to suit your wishes.
It is essential that the satellite antenna is correctly orientated for reception.
Selecting Screen Language
The screen display is available in the following languages:
- Press the button on the remote
control to go to the Main Menu.
- Select the menu option User Setup
using the or buttons.
- Press to go to the User Setup
menu.
!
i