Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 22 / 94

TSR 5200 HDD User Settings
16
Video Output
Here you can set the picture output according to the cabling to the TV or projector. CVBS,
RGB and YpbPr are available. By default, the CVBS is configured. First go to the
User
Setup menu, as described on page 14.
- Select the Video Output menu option
with or .
-
Press or to change between the
CVBS, RGB and YpbPr standards. To
be able to change the RGB setting,
enter the password using the numeric
keypad (the factory-default password is
0000)
-
Press to exit User Setup : the
changes will be saved.
It is possible to restart the device by switching to RGB mode. After entering the
password, the "Restart – Change Output to RGB" message appears. Whilst
restarting, the display [6] on the front side of the device shows the booting
information. Restarting takes about 35 seconds.
CVBS (Color Video Baseband Signal) is the standard for picture transfer to
TVs and is transferred via the Scart connectors [15 and 21], the video
connector [12] and the coaxial connector [20].
RGB transfers the primary colours red, green and blue via a wire each on
the Scart cable. This signal is only output to the Scart jack [15].
Please note that your TV or projector must support this signal type.
YPbPr is a video signal that is output to the three-part component connector
[13]. This offers you the best playback quality, although it requires a
TV or projector with corresponding component input (see also page 8
– Component Connector).
i
i