Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 57 / 94

TSR 5200 HDD Advanced Settings
51
LNB Type
Depending on the type of satellite antenna system the setting LNB type allows you to
customize the TSR 5200 HDD to your antenna system.
LNB means "Low Noise Block Converter" and is the signal reception unit of a
satellite antenna.
Due to the technical development in satellite reception
technology there are different LNBs on the market.
To specify the LNB type, select Antenna Setting from the Installation menu (see page
49) and press on the remote control.
-
Select the menu option LNB Type using
the or buttons.
-
Press or to select one of the
options Universal 1 , Universal 2 ,
Single - SL , Single - SH and Standard .
This setting will determine the local LNB
frequency that will be shown in the
following line.
Universal 1 A Universal LNB receives in the lower (9750 MHz) and upper (10600 MHz)
frequency spectrum. This is a very common model.
Universal 2 Like Universal 1, this LNB receives in both the lower 9750 MHz and the
higher 10750 MHz band.
Single - SL Single LNB for the lower band.
Single - SH Single LNB for the higher band.
Standard If none of the previous LNB types matches your satellite antenna system
you can set the local LNB frequency manually.
- Press the button on the remote control to go to the LNB Local Freq.
line.
- Enter the frequency via the numeric keys.
Press and then press to save the settings, or press to cancel the process.
i