Targa TSR 5200 HDD, Руководство пользователя и сервисная информация

Страница: 13 / 94

TSR 5200 HDD Connection Types
7
Coaxial (TV antenna connector)
If your TV does not offer any Scart connector, you can connect the TSR 5200 HDD to your
TV using a coaxial cable. To do so, connect the coaxial jack
TV OUT [20] of the TSR 5200
HDD to the antenna input of your TV.
The default output frequency of the TSR 5200 HDD is tuned to channel 38. You must set a
program preset on your TV on channel 38 to be able to reproduce the image and sound of
the TSR 5200 HDD. If you are not sure how to tune to channel 38 on your TV, please refer
to the TV manual.
If you are additionally using a video recorder via the antenna cable, make sure
that its output frequency is not tuned to channel 38. If this is the case, select
another output frequency for the video recorder or the TSR 5200 HDD. To find
out how to change the output frequency of the TSR 5200 HDD, see page 18 –
Channel Modulator.
Video connector
If required, use a cinch cable to connect the video jack
VIDEO [12] of the TSR 5200 HDD
to the corresponding video jack on your TV.
Please note that only the picture signal will be transferred via a video connector.
To transfer sound to the TV also you must connect the additional audio
connectors AUDIO L and AUDIO R [19] of the TSR 5200 HDD to the TV.
S-VHS connector
Coaxial connector
Video connector (with audio connector)
!
!