36
■
[New Registration] Button
1
.
Place the Remote Unit (Data Logger) you wish to register face down on
top of the Data Collector and click the [New Registration] Button.
Note
- If no Remote Unit is on top of the Data Collector or no Remote unit can be found,
a confirmation message will appear after which the info will be registered in the
Data Collector only.
- If the info is only registered in the Data Collector and no Remote Unit contains
that same info wireless communication cannot occur, so please be careful when
registering units.
- If you wish to register a multiple number of Remote Units to the same Group,
proceed by placing and replacing the Remote Units you wish to register on the
Data Collector and carry out registration for each one.
2
.
Set the Group Name, Remote Name, and Communication Frequency
Channel.
[Register]
Button
Group Name
Communication
Frequency Channel
Remote Unit
Name
3
.
By clicking the [Register] Button, registration will be completed.
- If you are registering a number of remote units to the same group,
place each one on top of the RTR-
57
C/
57
U and carry out the
registration into the same group.
- If you are registering units to different group names, please follow the
above steps over again.
