32
■
Communication via RS-
232
C
When wishing to carry out communication using a serial
communication cable, please make serial port settings.
Set which serial port you would like to use to communicate with the
Data Logger. There are two methods to make the settings: [Auto-
Detect] and [Select Serial Port].
Connect the serial cable to port you wish to use and then connect it
to the logger.
If you wish to use the same Communication Port for several types of
devices.
Place a check next to [Set Common COM Port for All Types] and
click [Set] Button and port settings can be done for all devices in
one step.
[Auto Detect] Button
1
.
In the main window, open the Setting / Communication Display of the
type of Data Logger connected to the computer and click the
[Communication Port Settings] Tab.
2
.
Click the [Auto Detect] Button to start the detection process.
3
.
When the detection is completed, a message will be displayed in the
[Detection Results] section.
4
.
By clicking the [OK] Button, the setting process will be finished and the
port to which the data logger is connected will be set.
5
.
By clicking the [Close] Button, the setting will be completed.
[Set] Button
Fixes the settings you have made in the dialog box.
[Close] Button
Closes the dialog box.
