TANDBERG M2/TT1220CIF/D, Инструкция по эксплуатации

Страница: 74 / 114

Technical Specification
Page B-8 Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
B.6.10 Analogue Audio Output
Table B.14: Analogue Video Output Specification
Parameter Performance
Output connector: 9 pin D-sub (male)
Output format: Balanced
Minimum bit-rate: 32 kbit/s
Maximum bit-rate: 384 kbit/s
Sampling rates: 32, 44.1, 48 kHz
Nominal output level:
18 dB below clipping: 0 dBm in 600
Ω
Adjustable: +/- 6 dB
Step size: 0.1 dB
Output impedance: < 20
Ω
Freq response:
Fs 44.1 / Fs 48 kHz: +/- 0.5 dB (20 Hz – 20 kHz)
Fs 32 kHz: +/- 0.5 dB (20 Hz – 14.5 kHz), +0.5 dB / -1.5 dB
THD+N @ +9 dB: < 63 dB (20 Hz – 20 kHz)
IMD @ 9.95-10.05 kHz, 0 dB: < -50 dB
Inter channel phase: < 3
°
Idle channel noise: < -74 dB
B.6.11 S/PDIF Audio Output
Table B.15: S/PDIF Audio Output Specification
Parameter Performance
Output connector: 9 pin D-sub (male)
Sampling rates: 44.1, 48 kHz
Output format: IEC 60958
Levels: ANSI/SMPTE 276M-1995