TANDBERG M2/TT1220CIF/D, Инструкция по эксплуатации

Страница: 21 / 114

Installing the Equipment
Instruction Manual: Professional Receivers and Decoders (IRD) Page 2-3
ST.TM.TT1220.1
2.1 Read this First!
2.1.1 Handling
The TT1220 must be handled and installed carefully and thoughtfully to
prevent safety hazards and damage.
2.1.2 Installing the Equipment
Ensure that personnel designated to install the unit have the appropriate
skill and knowledge. If in any doubt, please contact Customer Services
(see Preliminary pages for contact details).
Installation of the TT1220 should follow these instructions, and should only
be using installation accessories recommended by the manufacturer. When
rack-mounted, this unit must have shelf supports as well as being fixed at
the front panel.
Do not use this product as a support for any other equipment.
2.1.3 Lifting
Although this is a light product, in some circumstances it might be
awkward to lift, especially when packed. In which case, do not attempt to
lift or move it without proper assistance or equipment. If in doubt, get
help.
2.2 Preliminary Checks
2.2.1 Mechanical Inspection
Inspect the equipment for damage-in-transit. If in doubt, please contact
TANDBERG Television Customer Services (see Preliminary pages).
WARNING…
REMOVING THE COVERS OF THIS EQUIPMENT MAY INVALIDATE ANY WARRANTIES, CAUSE A
SAFETY HAZARD AND / OR AFFECT THE EMC PERFORMANCE. CHECK WITH TANDBERG
TELEVISION CUSTOMER SERVICES.
2.2.2 Moving the Equipment Safely
Do not place this product on an unstable cart, stand, bracket or table. The
product may fall and cause serious injury and serious damage to the
product. Use only with cart, stand, bracket or table recommended by
TANDBERG Television.
An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn. Do not move or carry the equipment whilst it
is still connected to the supply or other leads, is live, or is in operation.