TANDBERG M2/TT1220CIF/D, Инструкция по эксплуатации

Страница: 29 / 114

Installing the Equipment
Instruction Manual: Professional Receivers and Decoders (IRD) Page 2-11
ST.TM.TT1220.1
ASI Input (on ASI Input Models)
The ASI connector is capable of receiving an ASI copper stream at a
maximum sustained bit-rate of 60 Mbit/s.
Table 2.5: DVB-ASI Connector
Item Specification
Connector type BNC, Female 75
Ω
Connector designation ASI IN
Pin: Centre
Shield Signal
Ground / Chassis
Maximum burst time 370
µ
s at 216 Mbit/s
2.6.3 Output Connectors
Analogue Composite Video Output
This is a pair
2
of BNC sockets, which provides an analogue composite video
output. The default output standard is configured using the
Setup Video
Format
menu.
Table 2.6: Analogue Video Connector
Item Specification
Connector type 2 x BNC, Female
Output format* PAL (B, D, G, H, I, Combination N, M)
SECAM (B, G, H, D, K, K1, L)
NTSC (M)
*Output format varies with menu settings and incoming MPEG data.
Connector designation CVBS
Pin: Centre
Shield Video output
Ground / Chassis
Impedance 75
Ω
2
If the SDI output option is fitted, one of the Composite video output connectors is replaced with the SDI output
connector.