TANDBERG M2/TT1220CIF/D, Инструкция по эксплуатации

Страница: 88 / 114

Menus
Page C-10 Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
C.3.14 PTS Setup Menu
The PTS setup menu, allows the user to configure a offset for the audio, in
relation to the PTS (Presentation Time-stamp). This is useful for correcting
lipsync generated on the encoder (or earlier) stage in the transmission
process.
Table C.16: PTS Setup Menu
Display title: OUT: PTS SETUP Description Section
Aud delay ms +/- 999 ms selectable, in 1 ms steps
C.3.15 Factory Adjustment Menu
The factory adjustment menu contains parameters (video gain, chroma
gain, audio level fine tuning), that is preset to the correct level when
shipped from TANDBERG Television.
However, should there be a need to change these values, you may call
TANDBERG Television support, at the number shown in the Preliminary
pages of this manual, to obtain the necessary PIN to access these menus.
Table C.17: Factory Adjustment Menu
Display title: OUT: FACTORY
ADJ. Description Section
Password A 8 digit number has to be entered, to access the factory settings
submenu.
C.3.16 Alarm Setup Menu
The alarm setup menu, is a hub-menu, where the submenus contain all
the configurable alarm parameters, sorted into groups. The alarm
parameters may be configured into three levels of severity; alarm (A),
warning (W), or ignore (-).
Table C.18: Alarm Setup Menu
Display title: ADV: ALARM
SETUP Description Section
Input Input alarms submenu
PSI/SI PSI/SI related alarms submenu
CA CA related alarms submenu
Video Video related alarms submenu
VBI VBI related alarms submenu
Audio Audio related alarms submenu
Audio2 Audio2 related alarms submenu
Data Data output related alarms submenu
Config Errors related to the configuration of the unit
For further information on what the different alarms mean, refer to the
alarm chapter, Annex D, Alarm Categories and Conditions.