
Alarms
Instruction Manual: Professional Receivers and Decoders (IRD)
Page 5-5
ST.TM.TT1220.1
Table 5.3: Navigating the Alarm Status Menus
Step
Action
Result
1.
Go to the alarm menu, located under
the status menu.
The display will read “STATUS: ALARM” on the top
line.
2.
Scroll up and down through the alarm
categories.
Each category will show its status; OK, WARNING or
ALARM.
3.
To check the alarm state of an
individual alarm, right click on a
category showing a warning or alarm
state.
This will show a list of all current alarms generating a
warning or alarm message within the currently selected
alarm category.
For description of all the alarm messages, refer to Annex D, Alarm
Categories and Conditions.
5.4
Rear Panel Alarm Indicator
The rear panel is fitted with an alarm relay. This relay is a charge over
contacts relay, which indicates both the Alarm and the OK state of the
unit.
The description of the relay is located in Chapter 2, Installing the
Equipment.
Figure 5.2: Alarm Relay
1
5
6
ALARM
9
Содержание M2/TT1220CIF/D
