Tally Xpress T8016 Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 174

Tally Xpress T8016 Скачать руководство пользователя страница 89

Solving Problems

83

Media is
jamming
(Cont.).

Transparency (OHP)
media being fed from
the upper or optional
trays is not feeding
correctly.

Try loading about 100 pages of plain paper
first in the tray to give more height to the
transparency stack to reach the feed rollers.

Duplex
unit jams.

The wrong media is
being used.

Use media that is approved for your printer.
Refer to “What are the media types
supported?” on page 37.

Plain paper and stock up to 28 lb bond
(105 g/m²) can be autoduplexed. For
heavier weights, manual duplexing is
required. To manually duplex, remove the
media, flip it over, and reload it.

We recommend not mixing media types in
your media tray. For the exception, see
“Transparency (OHP) media being fed from
the upper or optional trays is not feeding
correctly.” on page 83.

Do not duplex envelopes, glossy stock
heavier than 28 lb bond (105 g/m²), labels,
thick stock heavier than 28 lb bond (105
g/m²), or transparencies.

Media may still be
jammed.

Recheck the paper path and make sure you
have removed all of the media jams.

Open

and close the front door to reset the printer.

If you are manually
duplexing, media
jams may occur if the
printed sheet(s)
reinserted are not
entirely flat.

Remove the jammed media, then remove
the media from the tray and flatten it out.

Symptom Cause

Solution

«
...
87
88
89
90
91
...
»

Содержание Xpress T8016















































































































































































Отзывы:

Нет отзывов