manualshive.com logo in svg

Tally Xpress T8016, Руководство пользователя

Поделиться
Скачать
Tally Xpress T8016 Скачать руководство пользователя страница 65

Introduction 

59

WARNING!

If you get toner in your eyes, wash it out immediately with cool water 
and consult a doctor.

n

Lift the printer from the bottom only, using the carrying grips. Make sure 
that two people are available to lift the printer when moving it. 

n

Do not place anything on the top of the printer.

n

Do not open any cover of the printer 

during

 printing.

n

Always close the printer covers gently. Never expose the printer to 
vibrations.

n

Do not leave the printer’s covers open for any length of time, especially in 
well-lit places; light may damage the imaging unit.

Attention

The OPCs in the imaging unit are extremely sensitive to bright light, 
direct sunlight, and touch. Always leave the imaging unit in its 
protective box until you’re ready to install it. Any exposure to light 
should be limited to less than two minutes, or permanent damage 
could result. Handle the unit carefully so you don’t touch the black 
surface of the transfer roller.

n

Do not cover the printer immediately after using it. Turn it off and wait until 
it cools down. 

When the front cover is opened, the fuser temperature drops gradually 
(one hour wait time). 

Содержание Xpress T8016















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды