Tally Xpress T8016, Руководство пользователя

Страница: 149 / 174

Requirements
143
2?
A surface can be tested for levelness with a standard round pencil. If
the pencil rolls, the surface is not level. Clear the area of any obstruc-
tion or items such as cables that might prevent the printer from sitting
directly on the flat, level surface.
WARNING!
Obstructing the ventillation grilles could present a fire hazard.
n
Do not tilt the printer more than 10° when moving it.
n
If the printer is located in a cold room that is rapidly heated, or if the printer
is moved from a cold place to a warm, humid place, condensation may
occur within the printer, degrading print quality. If this occurs, allow the
printer to adapt to the environment for about one hour before use.
n
If using a humidifier or water vaporizer in the room with the printer, use
only purified or distilled water. Impurities in the water may be released into
the air, where they can accumulate inside the printer and cause degraded
printer output.
Close to an easily accessible
grounded power supply (on an
exclusively dedicated power outlet)
that meets printer specifications.
Near your computer. At the length
6.5' (2 m) or less for an IEEE 1284
bidirectional parallel connection. A connection to the same electrical
circuit as high-current machines.
Noise-generating equipment, such
as a copier or air conditioner, and
strong magnetic or electromagnetic
fields, such as a refrigerator.
With enough space to allow
adequate ventillation and easy
servicing. Water, water pipes, liquid (drink)
containers, and corrosive chemicals
or vapors, such as ammonia.
With an ambient temperature range
of 50°–90° F (10°–32° C) and
relative humidity range of 15%–85%
(noncondensating). Small, loose metal parts, such as
paper clips and staples.
At an altitude of 0–10,170'
(0–3,100m). Excessive vibration.
With these characteristics... But away from...