5 0
T A L K S W I T C H CO N F I G U R A T I O N
•
To access service provider VoIP lines, select
VoIP Service Provider 1
VoIP Numbers
.
5. If you set
Line Type
to
Phone Lines
:
a) Add lines by selecting the adjacent check boxes.
b) Change the order of the lines by selecting a line, and then clicking
the
Move Up
or
Move Down
button.
6. If you have multiple TalkSwitch units connected to the LAN, the
For all
Hunt Groups, hunt lines on the same unit first
check box appears. If
selected, outbound calls will always start by hunting the lines on the
TalkSwitch unit that the extension is connected to. This minimizes
network traffic between TalkSwitch units. The check box is selected by
default, but you can disable this feature if necessary.
AUTOMATIC ROUTE SELECTION
The
System Information > Automatic Route Selection
page allows you to
set up automatic route selection (ARS) and toll restriction.
Introduction
Automatic route selection
Automatic route selection (ARS) routes outgoing calls to a certain line hunt
group depending on the leading digits. It can also prefix phone numbers
with certain carrier codes depending on the leading digits and time of day.
This way calls can use specific telephone lines, alternative carriers, or VoIP
lines, for least-cost routing. For example, ARS can route international calls to
a VoIP service provider; national calls to an alternative carrier offering a
discounted calling plan; and calls to cellular phones on a telephone line that
is connected to a fixed wireless terminal for cellular-to-cellular calling.
If the user dials a line hunt group number, ARS can override the selection
and use a different line hunt group depending on the leading digits.
Enable password protection when ARS or toll restriction is used. Change
the password frequently to prevent unauthorized users from making calls
or changing the configuration. See