8 2
T A L K S W I T C H CO N F I G U R A T I O N
•
Select the second option to have TalkSwitch repeat notification until
the user either dials
to skip the message, or dials
to play
the message. This is useful for cell phones where the telephone
company plays a
“subscriber not available”
message instead of a busy
tone.
Setting up notification by pager
1. Select the
Dialed Notification
tab.
2. Select the
Pager
check box.
3. Enter the
Pager number
. Enter the number as you would normally dial it
(i.e. without the line hunt group number). You can enter digits 0-9,
space, dash, comma,
and
. A comma pauses dialing for two
seconds.
4. Enter the
Numeric message
that will appear on the user’s pager.
Setting up the notification options
If the TalkSwitch system will phone and/or page the user, configure the
notification options.
If the system will both phone and page the user, the system will continue
the notification attempts until the user has been both phoned and paged.
1. Click
Configure Notification Options...
. The
Configure Notification
Options
window appears.
2. Select the line hunt group that the TalkSwitch system will use to phone
or page the user.
3. Select the number of times that the TalkSwitch system will let the
number ring before aborting each attempt, ranging from 1 time to 10
times.