T-Home Comfort Pro S, Руководство по установке

Страница: 111 / 168

109
Comfort Pro P 300/500 PC Voice over IP (VoIP)
You will not need a licence to install Comfort Pro P 300/500 PC but you will require a licence to operate it with
the Comfort Pro S. Unit licences, enabling the simultaneous operation of a certain number of
Comfort Pro P 300/500 PC s, are available.
The licences are activated in the Comfort Pro S’s Configurator in the Menu SYS Configuration : Licences .
The system software includes a licence for a demo version for temporary use (60 days). Licences can be com-
bined. Each licence can be activated only once.
Installation
Installation is done using a setup programme. The Comfort Pro P 300/500 PC can also be installed without a
user interface. The programme can then be used via a CTI application (Net-TAPI or Telefonie-Assistent).
Start the installation programme from the Comfort Pro P 300/500 PC product CD and follow the installation
assistant’s instructions.
Configuration
Analogue to the VoIP system telephones, the Comfort Pro P 300/500 PC creates multiple IP connections to
the Comfort Pro S. When you start the programme for the first time, the Options dialogue is automatically
opened. Here you must configure the following values:
1. Enter in the VoIP IP Address field the Comfort Pro S’s IP address.
2. Enter six hexadecimal-digits into the Device ID field. This device ID is not a MAC address, so overlapping
with existent MAC addresses is possible. The device ID is configured in the Configurator , on the
PBX Configuration: Devices: VoIP Phones page.
3. Confirm with OK .
Notes
VoIP system telephony requires an active IP connection to a workstation computer. If a Firewall is installed for
your workstation computer, you may need to explicitly allow this connection.
If you log on to the workstation computer using a different user name, you must reconfigure these values.