T-Home Comfort Pro S Скачать руководство пользователя страница 153

Страница: 153 / 168

151

Telephony

Frequently Asked Questions

Question: The mains plug is

connected, the mains socket is

supplying output, but the

Comfort Pro S still does not

function.

D A N G E R !

This device contains hazardous voltages. To make the system dead,

remove the power plug from the socket.

Open the housing (see

Opening and Closing Comfort Pro S

starting on page 27). Is the power LED illuminated?

If not, contact your service centre. The AC adapter plug of the

Comfort Pro S may be defective.

Question: After restarting the

Comfort Pro S, nothing is

indicated on the displays of any

connected terminals.

It takes a short while for the Comfort Pro S to start up.

After the restart, check whether the activity LED blinks at a rate of

10s / 1s. This indicates that the Comfort Pro S has started up cor-

rectly and is ready for operation. If the activity LED is not illuminated

or the LED is dark after a short period of rhythmical blinking or the

LED blinks 3 times fast in the meantime, the restart was not suc-

cessful.

If the Comfort Pro S has not restarted properly, reset the

Comfort Pro S to its original factory setting (refer to the chapter

entitled

Resetting the System Data

starting on page 72).

Telephony

Question: It is not possible to

make external calls.

Check the connection between the NTBA and the Comfort Pro S.

In the

Configurator

, check whether the external S

ports are con-

figured correctly (

PBX Configuration: S

menu):

Содержание Comfort Pro S









































































































































































Результаты поиска

Содержание Comfort Pro S

Отзывы:

T-Home Comfort Pro S, Руководство по установке, Страница: 153 / 168

Результаты поиска

Содержание Comfort Pro S

Отзывы: