T-Home Comfort Pro S Скачать руководство пользователя страница 33

Страница: 33 / 168

Interface Cards

Installation

Interface Cards

Comfort Pro S can be expanded through the use of interface cards. Comfort Pro S has two large and one

small slots for interface cards.

Please note:

Switch off the Comfort Pro S. Pull the plug out of the mains power sup-

ply socket. Never install or de-install interface cards when the Comfort Pro S is

switched on.

Installing Interface Cards

Each interface card is connected to the main board via two sockets. Comfort Pro S’s large slots have the fol-

lowing characteristics:

■

There is no prescribed order for assignment. You can, for example, use an interface card in slot 2,

although slot 1 is not assigned.

■

Each slot is connected to a group of pressure terminals. The pressure terminals are given the same colour

as their slots to make them easier to identify.

■

The slots are not identical. Interface cards can therefore not be used in all and any slots. Please see the

overview under

Position of the Interfaces

starting on page 35 for details.

Содержание Comfort Pro S









































































































































































Результаты поиска

Содержание Comfort Pro S

Отзывы:

T-Home Comfort Pro S, Руководство по установке, Страница: 33 / 168

Результаты поиска

Содержание Comfort Pro S

Отзывы: