T+A Elektroakustik TCD 610 W SE, Руководство пользователя

Страница: 34 / 42

34
FCC Information to the
user (for use in the United States of America only)
Class B digital device
– instructions:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different form that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Notes on Energy Saving
General information The TCD 610 W SE satisfies the requirements of the latest directives
concerning energy-saving measures (EuP directive). The modern design of the
mains power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are
not currently required are automatically switched off. The micro-processor itself
operates in stand-by mode at a relatively low clock speed.
In stand-by mode the current drain of the
TCD 610 W SE is less than 0.5 Watt.
If you intend not to use the sub-woofer for a long period, it should be discon-
nected from the mains socket, i.e. the mains plug should be withdrawn from the
wall socket.
Automatic power-on
The sub-woofer features an automatic power-on circuit. If the sub-woofer
detects a music signal at one of its inputs, it automatically switches itself on. If
no music signal is detected for a period longer than ten minutes, the
TCD 610 W SE automatically switches to stand-by mode.

If the sub-
woofer is operated in the ‘ON’ mode (permanently switched on), i.e. if
the automatic power-on circuit is not in use, the device must be switched off
either manually (using the remote control handset) or by the mains switch on
the back panel.