E-mail: [email protected] or Fax: 01246 222 888
Page - 21 -
Standard/Double/Triple according to the Time-lapse VCR setting. The double /triple density
is sometimes called “virtual real time” VCR. You can achieve a higher recording bandwidth
if you use this kind of time-lapse VCR.
5.9.6 Sync-Trig Edge
This item allows you to select the rising or falling edge of the sync (trigger) signal from the
VCR.
5.9.7 Playback Adjust
This item allows you to select the sampling video for playback. There are six choices (Auto,
1,2,3,4,5).
5.9.8 VCR Input Check
This function is used by the engineer to check the VCR input is set up correctly. This can be
switched ON/OFF using the left/right keys. This is a troubleshooting option, which can help
the engineer if there is a problem during playback.
5.9.9 Recorder Type
Not currently applicable.
5.9.10 VCR Output
This item allows you to select the signal for the VCR Output, either VCR (Normal) or
Gateway.