E-mail: [email protected] or Fax: 01246 222 888
Page - 19 -
5.8 VCR Adjust
Items 1 – 4 are used to adjust the picture quality of playback, use the left/right keys to
adjust their values.
VCR Adjust
VCR_Brightness
47
VCR_Contrast
34
VCR_Saturation
45
VCR_Hue
51
RS-485 ID Setup
224
Baud Rate
9600
Clear Alarm List
Screen Center Adjust
Show Color Bar
Load Factory Setting
5.8.1 RS485 ID Setup
Not currently applicable.
5.8.2 Baud Rate
Not currently applicable.
5.8.3 Clear Alarm List
Move the cursor to the “Clear Alarm List” item and press LIVE. The alarm event log will be
cleared.
5.8.4 Screen Center Adjust
This item is used to adjust the monitor’s center point. Move the cursor to Screen Center
Adjust, press LIVE then the menu will disappear. You may use the directional keys to adjust
the monitor’s center point. Press FUNC or MENU to escape.
5.8.5 Show Color Bar
This item allows you to fine tune the monitor’s performance using a color bar pattern
generated by the multiplexer.
Move the cursor to “Show Color Bar” and press the LIVE key. The color bar will appear. Press
FUNC or MENU to return.
5.8.6 Load Factory Setting
This item allows you to recall the “Factory Default” settings from the read only memory.
Move the cursor to “Load Factory Setting” and press LIVE. The multiplexer will reset to the
original factory settings.
