E-mail: [email protected] or Fax: 01246 222 888
Page - 16 -
5.6 Motion Detection
This menu allows you to configure the Motion Detection function on the multiplexer. Each
camera’s “Detection Area” and “Sensitivity” can be defined individually.
In the “MOTION” menu, the Motion setting indicates the level of movement that a camera
can detect, ie, its sensitivity.
CH01~CH16 is the trigger level of each camera. If the detected motion amount is larger
than the trigger level you set, the alarm processor will work. (If you wish to use this feature
for a camera channel, remember to enable the motion detection for that camera). If the
MOTION level is short, the sensitivity of motion detection is higher. This can be adjusted by
the right/left direction keys.
MOTION
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
CH10
CH11
CH12
CH13
CH14
CH15
CH16
