E-mail: [email protected] or Fax: 01246 222 888
Page - 14 -
Gain Control
140%-70%
This is the gain control for each camera. There are 8 settings. 1 (darkest) to 8
(brightest). Move the cursor to change the value and then press LIVE.
Alarm Relay Input
There are two alarm input signals: Alarm NO and Alarm NC. Use the directional keys to
toggle between the values and press LIVE to set.
Alarm Input signal Set Up
This item allows you to enable or disable the alarm input signal detection. Use the
directional keys to toggle between the values and press LIVE to set.
Motion Detection Set Up
This item allows you to enable or disable the motion detection function for each camera.
Move cursors and press LIVE for change. Use the directional keys to toggle between the
values and press LIVE to set.
Multiplexer
Alarm Input
NO
Multiplexer
Alarm Input
NC