E-mail: [email protected] or Fax: 01246 222 888
Page - 17 -
Detect Area
This item allows you to set up the motion detect area.
In the “MOTION” menu, select the camera channel where you wish to set up the
detection area and press the “Live” key. The following will be displayed:
This screen will show 192 (16*12) “detection grids”. You can use the directional keys and
the LIVE key to select and then enable/disable the grids. (Small circle: disabled; larger circle:
enabled)
The default “cursor size” is 4 grids (2*2), which means that you can toggle the setting
4 grids at a time. You can use the SEQ key to change the cursor size from 1*1 grid to 2*2,
3*3, or 4*4 grids. This makes the set up process easier. You may also use TAPE key to turn
all the grids on or off. Once set up is finished, press the FUNC or MENU button to return to
the “Motion” set up page.