background image

  
 
 

 
 
 

 

7800MDM-12G 

12G to/from Quad-Link 3G Bi-Directional  

Converter for UHD Signals 

 

User Manual

 

 
 
 
 
 
 
 

 

 
 
 
 
 

© Copyright 2017 
 

EVERTZ MICROSYSTEMS LTD. 

5292 John Lucas Drive, 
Burlington, Ontario,  
Canada L7L 5Z9 
 
Phone: 

+1 905-335-3700 

Sales: 

[email protected] 

Fax: +1 905-335-3573 

Tech Support:  [email protected]  

Fax: +1 905-335-7571 

Web Page: 

http://www.evertz.com

 

 
Version 1.0, March 2017 

 
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of 
purchasers of the 7800MDM-12G series product.  Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the 
operation of the 7800MDM-12G series product.  Due to on going research and development, features and specifications in this manual are subject 
to change without notice. 
 
All rights reserved.  No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd.  Copies of 
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

 

 

Summary of Contents for 7800MDM-12G

























Reviews: