Syneron Candela VelaShape III Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 86

Syneron Candela VelaShape III Скачать руководство пользователя страница 13

VelaShape III User Manual Safety

PB81499EN

13

Because of the heating effect by RF energy, highly conductive objects such as
superficial metal or conductive implants, rods, plates or pins should be avoided in
the treatment area.

Mechanical Rollers Safety Issues (Vsmooth Applicator)

Beware of any loose material in or near the immediate treatment area that may
get caught in the rollers. There should be no loose cords, clothing, hair, etc. in the
treatment area. Ensure integrity of rollers' coating before and during treatment.

Electrical and Mechanical Safety

●

Keep all system panels closed. Removing the panels creates a safety hazard.

●

Keep hands away from the applicator during system start-up.

●

Perform maintenance procedures when the system is shut down and
disconnected from its electrical power source.

●

The system's cables are equipped with isolation coating and the electronic
circuitry is also isolated from the mains power supply. In addition, the
system’s plastic covers serve as a means of isolation.

●

Move the system slowly and carefully. The system weighs approximately
20 kg (44 lbs.) and may cause injury if proper care is not used when moving it.

●

The system is grounded through the grounding conductor in the power cable.
This protective grounding is essential for safe operation. The RF electrodes
are the only non-grounded component of the system, due to the nature of the
treatment.

●

Portable and mobile RF communications equipment can affect medical
electrical equipment, Interference may occur in the vicinity of the equipment.

●

The use of accessories and cables other than those specified may result in
increased emissions or decreased immunity of the device. It is forbidden to
connect any third-party equipment to the system without written approval
from Syneron Medical.

Maintaining the System

●

Only authorized Syneron technicians are qualified to service the system.

●

Shut down the system and disconnect the power cable before performing any
maintenance procedures (see Chapter 7).

«
...
11
12
13
14
15
...
»

Содержание Candela VelaShape III























































































Отзывы:

Нет отзывов