Syneron Candela VelaShape III, Руководство пользователя системы, Страница: 11 / 86

VelaShape III User Manual Safety
PB81499EN
11
System Safety Features
The VelaShape III system incorporates the following safety features:
●
The power electronics cannot be activated unless an applicator has been
connected to the system.
●
Upon system activation, IR, RF, and Vacuum are at Level 0 on the control
panel.
●
During activation, the system performs a self-test of the hardware to detect
any faults, so that you can shut down the system if necessary.
●
IR and RF energies are not delivered unless full contact with the tissue is
conducted and the applicator's trigger or footswitch is pressed.
Patient and Personnel Safety
When handling the VelaShape III system, the primary safety concern should be
the safety of both the treating attendant and the patient. Follow these personal
safety guidelines to maintain a high level of personnel safety:
●
Make sure that only well-trained attendants perform treatment.
●
Before activating the system, make sure any long hair of the treating attendant
or the patient is safely pulled back and tied.
●
Ascertain that all jewelry is removed.
●
Prior to scheduling treatments, obtain a detailed patient history to verify that
the patient is eligible and is in fit condition to undergo treatment.
●
Fully inform the patient regarding the treatment protocol, the likely results
and any risks associated with treatment.
●
Improper treatment may cause local burns.
●
Opaque eye protection should be used when working within a 30 cm (12")
proximity to the patient's eyes.
Warning
Prior to system activation, any personnel operating or maintaining the
system should be familiar with the safety information provided in this
chapter.