Syneron Candela VelaShape III Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 86

Syneron Candela VelaShape III Скачать руководство пользователя страница 10

Safety

PB81499EN

10

2. S

AFETY

This chapter describes the safety issues regarding the use and maintenance of the
VelaShape III system, with special emphasis on optical and electrical safety.

Introduction

The system is designed for safe and reliable treatment, when used in accordance
with proper operation and maintenance procedures. Only trained practitioners are
qualified to operate the system. The user and all other personnel operating or
maintaining the system should be familiar with the safety information provided in
this chapter. Syneron Medical Ltd. assumes no liability whatsoever for any
damage or injury as a result of an application of a product which is not in strict
accordance with the instructions provided with the product. The primary
consideration should be to maximize safety for both treating attendant and the
patient.

Warning

●

Read this chapter to be familiar with all of its safety requirements
and operating procedures prior to operating the system.

●

Any intense optical energy or RF device can cause injury if used
improperly.

●

High voltage is present inside the system.

●

Always be aware of the possible dangers and take proper
safeguards as described in this manual.

●

In the event of adverse effects or injury/illness, immediately
contact:

- In North America: Syneron, Inc.

- In Europe: CEpartner4u B.V.

- Outside North America and Europe: Syneron Medical Ltd.

●

For complete contact information please refer to page 3 of this
manual.

«
...
8
9
10
11
12
...
»

Содержание Candela VelaShape III























































































Отзывы:

Нет отзывов