Symbol PTC-2124, Руководство пользователя

Страница: 99 / 114

Connecting a wire vehicle adapter to the PTC
PTC-2124 User’s Guide 87
Installing the ground wire
The following items are required for the installation of
a ground wire:
• A wire stripping/crimping tool
• An assortment of crimped terminal rings
• A power drill
• An assortment of drill bits
• A metal punch
• An assortment of sheet-metal screws
• An assortment of washers
• A screwdriver
The ground wire should be installed by performing
the following steps. The following items are required
for connecting the power wire to a fuse panel:
1. Select a place on the vehicle cab’s sheet metal
where you will attach the ground wire.
2. Drill a small hole at that spot.
3. With a punch, dimple and enlarge the hole
slightly.
4. Scrape off a small circle of paint around the hole.
You must expose the metal for a good electrical
contact.
5. Use a sheet-metal screw and washer of the
appropriate size to secure the ground wire’s
terminal ring to the sheet metal.
Securing the wires
Wire ties should be used to secure the installed wires.
Secure the wires in place every 12 to 18 inches (30 to
46 centimeters) using wire ties.