Symbol PTC-2124, Руководство пользователя

Страница: 56 / 114

Chapter 3 Configuring TN-3270/5250
44 PTC-2124 User’s Guide
For example, a half discharged battery pack takes
0.75 to 1.25 hours to recharge.
The built-in charger also protects the battery pack
from being overcharged if charging continues after the
pack has reached a full charge.
Charging via the AC or vehicle adapter
The PTC-2124’s battery pack can be recharged in one
of two ways: via an AC adapter that connects to both
the PTC’s power jack and an AC electrical outlet (via
a power cord) or via a vehicle adapter that attaches to
the PTC’s power jack and to a vehicle’s cigarette
lighter socket or directly to a vehicle’s battery or fuse
panel.
The wire vehicle adapter is available
in two voltages. Make sure you use
the adapter appropriate for your
vehicle. See Appendix B for ordering
information. Follow the instructions in this section to charge your
PTC’s battery pack via an AC adapter and an
electrical outlet or via vehicle power using a cigarette
lighter vehicle adapter. To recharge the PTC’s battery
pack using a wire vehicle adapter that attaches
directly to the vehicle’s battery or fuse panel, follow
the instructions in Appendix G.
The items required for recharging the battery pack
are as follows:
If you are using the PTC outside of
the U.S. or Canada, you need a
power cord with a CEE-22 connector
at one end (for the power supply)
and an appropriate wall plug at the
other end. • A 15 VDC, 2.7 A AC adapter and an appropriate
power cord or a 15 VDC, 2.7 A cigarette lighter
vehicle adapter,
• An electrical outlet providing 100 to 240 VAC or a
vehicle’s cigarette lighter socket.
The following procedure should be used for recharging
the battery pack:
1. Connect the appropriate power cord to the AC
adapter.
2. Connect the AC or vehicle adapter to the PTC’s
power jack; then, plug the AC adapter’s power
cord into an electrical outlet or the vehicle adapter
into a vehicle’s cigarette lighter socket.