Symbol PTC-2124, Руководство пользователя, Страница: 50 / 114

Chapter 3 Configuring TN-3270/5250
38 PTC-2124 User’s Guide
Figure 5. Typical data card (connector end)
Other PCMCIA devices
Other PCMCIA devices may also need preparation
before they can be used. Refer to the instructions
packed with the device.
Inserting a PCMCIA card or device
Use the following procedure to insert PCMCIA cards
or devices into the Acts PCMCIA slot(s).
!
Do not force a card into the slot.
You could damage both the card
and the slot. If it does not go in
easily, turn the card over and try
again. Do not insert anything
other than PCMCIA cards or
devices into the slot. Doing so
could cause damage.
Before you begin, examine the card. One end has two
rows of holes. This is the connector that connects the
card to the PCMCIA slot. One side of the card has a
notch, and the other has a slot. These key the card so
that it can be inserted into the slot in only one way.
On a data card, a small write-protect switch is on the
end opposite the connector. See Figures 4 and 5.
1. Suspend the PTC.
2. Open the PCMCIA door by pulling the flexible
door open with your index finger.
Connector
Slot Notch