Symbol PTC-2124, Руководство пользователя

Страница: 98 / 114

Chapter 3 Configuring TN-3270/5250
86 PTC-2124 User’s Guide
8. Remove the bolt from the battery’s positive (+)
terminal.
9. Thread a 3/8 in. nut onto a 3/8 x 1 1/2 in. bolt.
10. Slide one 3/8 in. washer onto the bolt.
11. Slide the terminal ring on the power wire’s fuse
link onto the bolt.
12. Slide a second 3/8 in. washer onto the bolt.
13. Slide the vehicle’s positive (+) cable connector onto
the bolt.
14. Screw the bolt into the battery’s positive terminal
and tighten it securely.
15. If necessary, tighten the nut installed on the bolt
to secure the washers and cable connectors in
place.
Connecting to the fuse panel
The following items are required for connecting the
power wire to a fuse panel:
• A wire stripping/crimping tool
• An assortment of crimp connectors
• A truck or automotive fuse
The following steps should then be performed:
1. Strip 1/4 in. (0.64 cm) of insulation from the end of
the power wire.
2. Crimp the correct connector for your fuse panel
onto the power wire.
Many fuse panels require a female
spade connector. 3. Connect the power wire to the fuse panel.
4. Install a fuse of the proper rating (7.5 A) in the
fuse panel.