Symbol PTC-2124, Руководство пользователя

Страница: 44 / 114

Chapter 3 Configuring TN-3270/5250
32 PTC-2124 User’s Guide
If you boot an ATA card in Slot 0 as
drive C, the other PCMCIA slot is
currently not usable for other
PCMCIA devices.
With Card and Socket services and DOS
The following drive letters are assigned when the PTC
is used with Card and Socket services and DOS.
With Card and Socket services and Windows
When the PTC is used with Card and Socket services
and Windows, drives are dynamically assigned as
they are installed and allocated.
Boot sequence
Drive boot sequence is the order in which the PTC
searches its disk drives (physical and logical) to locate
the config.sys and autoexec.bat files.
• The PTC searches for config.sys first, starting on
drive C and then searching Slot 0 (the slot closest
to the PTC’s cradle connector) until the file is
found.
• The PTC then searches for autoexec.bat,
starting on drive C and then searching Slot 0 until
the file is found.
Drive letter Assignment
C Internal compact flash hard disk
drive.
D SRAM support or ATA hard disk
drive card in Slot 0 (based on configu-
ration of Card services ATA driver).
E SRAM support or ATA hard disk
drive card in Slot 1 (based on configu-
ration of Card services ATA driver).
F ATA hard disk drive card in Slot 0 (if
SRAM support is configured in the
ATA driver).
G ATA hard disk drive card in Slot 1 (if
SRAM support is configured in the
ATA driver).